Flo

Plumbing Tools List – Everything You’ll Need for DIY Projects

Posted on 11/11/2020 by Gabriel Halimi

If you’re planning on being a hands-on, DIY-type of homeowner, you need a solid foundation before you can do any work. And the most important part of that foundation is your toolset. Doing plumbing repairs throughout the house calls for several different tools to be used. And when trouble strikes, you want to be prepared. Here’s a list of the essential tools for any DIY plumber. 

Box Wrenches

box wrenches

 Box wrenches are common wrenches that you may already have. They are non-adjustable, meaning you need a very specific sized box wrench depending on the bolt you’re working on. Luckily, these wrenches typically come in complete sets, giving you a full arsenal of sizes to choose from.  

Channel Locks

Channel locks are a type of adjustable pliers commonly used by plumbers. They have a slip-joint, which allows the jaws to be adjusted to fit the size of the nut or bolt you need loosened. What makes channel locks so effective are the amount of leverage you can get, making them perfect for loosening tough bolts. They’re sort of a wrench and pliers hybrid. 

Crescent Wrenches and Spud Wrenches

Crescent wrenches are adjustable wrenches that work better than channel locks if you’re working with nuts or bolts that have a chrome finish. Since they have a smooth surface (as opposed to the hard teeth of channel locks), crescent wrenches can get the job done without scratching your bolts. 

Spud wrenches are similar to crescent wrenches except they have a spike on the other end. The spike is used to line up holes and slots for bolts. Spud wrenches are fairly uncommon, but having one around wouldn’t hurt. You never know when you’ll need that spike to line something up. 

Pipe Wrench

plumbing wrenches diy

If you live in an older home with galvanized steel pipes, you’re definitely going to want to invest in a pipe wrench. Pipe wrenches aren’t used to loosen nuts or bolts like other wrenches. They’re specifically designed to turn and loosen pipes and pipe joints. These wrenches get a lot of leverage, and they can scratch and scuff up pipes, so make sure you only use them on steel or copper pipes. 

Basin Wrench 

Basin wrenches (or tap or sink wrenches) are specifically designed to access nuts in hard to reach places, like under and behind sinks. The wrench has a long shaft with a pair of spring-loaded gripping jaws on one end, and a handle at the other end. The jaws can be reversed depending on whether you have to tighten or loosen a bolt. 

How To Use a Basin Wrench:

The first step is to position the jaws so they are facing the opposite direction you need to rotate the nut. So if you need to loosen a nut (by turning it to the left, or counter-clockwise), you want the opening of the jaws oriented to the right.  

Simply guide the jaws open by hand and close them around the nut. Now, use the pivoting handle to force the nut loose. You typically only need to give it a half or full turn and you’ll be able to continue removing the nut by hand. If you need some extra leverage, you can use an adjustable wrench to create a stronger handle on the shaft.  

Blow Torch

plumbing equipment blow torch

If you have copper or galvanized steel pipes in your home, a blow torch is a handy tool to have at your disposal. When working with copper pipes, you’ll have to solder pipes and joints together if you’re doing any repairs. And with galvanized steel pipes that are prone to corrosion, heating up pipe joints with a blow torch will help you loosen up joints that fused together.  

Wet/Dry Vacuum 

Also known as a Shop-Vac (which is actually just the name of a wet/dry brand), the wet/dry vac is a great all-around tool to have around the house. If you’re ever dealing with a clogged or slow-moving drain, you can use a wet/dry vac to suck up any standing water. Having a dry area to work with makes any DIY job that much easier. 

One thing to keep in mind is these machines have an air filter. If you’re planning on sucking up water, you’ll want to remove the air filter first.

Hacksaw 

hacksaw

Hacksaws are great for slicing though metal pipes. They vary in quality so if you’re looking to saw through anything stronger than cheap plywood, make sure you spend a little extra and get a quality saw. If you’re doing something like replacing a toilet or toilet flange, you might need to cut the heads off the bolts on the base of the toilet. Investing in a mini hacksaw will make that job a lot easier.   

Drain Snakes or Augers 

Snakes and augers are effective tools for breaking free the various clogs that will inevitable show up in your drain pipes. Bathroom sinks, toilets and bathtub or shower drains generally see a lot of use and can easily get blocked up with hair and other obstructions. Snakes allow you to get around the various curves and bends in your pipes and either snag the clog or push it loose.   

PEX Tools 

If you’re going to be working with PEX pipes, there are a few specific tools you’ll need. First thing you’ll need is a PEX pipe cutter. This will give you clean cuts in your PEX piping. Then you’ll need crimp rings and a crimp tool. Both are also designed specifically for PEX piping. You can get all three for around $50 online or at a home improvement store.  

Water Pressure Gauge 

Pressure gauges are something we mention quite a bit here at Flo, and for good reason. Water pressure is an important marker of your home’s plumbing health. A good pressure gauge will let you know right away if you have low or high water pressure, important knowledge in troubleshooting plumbing issues. 

How to use a water pressure gauge:

Pressure gauges are extremely easy to use. All you have to do is locate a spigot or threaded faucet. Ideally, you want to find something that’s as close to the water main as possible. Just thread the pressure gauge onto the spigot and turn the spigot on. You should get an instant pressure reading. 

Flo by Moen 

Checking on your water pressure is a good thing, but getting a reading only after you suspect a problem could mean you’ve already got some water damage to deal with. For the truly proactive homeowner, using a device that keeps constant tabs on your home’s water pressure will help you avoid serious plumbing disasters. The Flo by Moen Smart Water Shutoff is a smart home water security system that monitors water pressure, flow, and area temperature while also conducting daily pressure loss tests (Health Tests). 

A Tool For Every Job

Each home plumbing project requires a different set or combination of tools, but if you have the essentials covered, you should be able to tackle most projects. An alternative to buying all these tools at once is to just buy them as needed. In that case, reading this guide has given you a primer on what tools you’ll need.

Articles You May Like

5 Best Smart Home Devices to Lower Your Utility Bills
Here’s a list of the five best smart devices to help you lower your footprint and your utility costs at home.
Read More
Posted on by Gabriel Halimi
5 Crucial Ways to Protect Your Home When You’re Gone
Here are a few ways to hack your home to make sure it’s safe, protected, and vacation-ready.
Read More
Posted on by Gabriel Halimi
How to Prevent Mold and Mildew
Make sure to put these practices into place to prevent mildew and mold growth to keep your home and your loved ones safe.
Read More
Posted on by Gabriel Halimi
6 Money-Saving Tips for Airbnb Hosts
Here are six foolproof tips touted by experienced Airbnb hosts to maximize your profits and keep your Airbnb in the black.
Read More
Posted on by Gabriel Halimi
How to Ensure Your Vacation Home Isn’t Wasting Water When You’re Away
Here are a few tips to make sure your vacation home is secured even after you leave.
Read More
Posted on by Gabriel Halimi
How to Unclog Your Bathtub Once and For All
Read More
Posted on by Gabriel Halimi
Your Toilet Could Be Leaking Right Now
We use our toilets every day, yet to most of us, they remain a mystery.
Read More
Posted on by Gabriel Halimi
How to Fix and Diagnose High Water Pressure at Home
We’ll talk about the common signs of having high water pressure and what you can do about it.
Read More
Posted on by Gabriel Halimi
How to Find Leaks in Your Home
Here are a few ways to protect your home by finding and stopping small leaks before they turn into serious water damage.
Read More
Posted on by Gabriel Halimi
How to Adjust Your Water Pressure Regulator
In this article, we’ll go over how pressure regulators work and why it’s so important to have one that works properly.
Read More
Posted on by Gabriel Halimi
Why a Smart Home is a Smart Investment

Will a smart home pay for itself in the long run? Will it simplify your life or complicate it? Read on to see how you may benefit.

Read More
Posted on by Gabriel Halimi
How to Find and Repair Water Leaks – A Comprehensive Guide
Here you’re going to learn about some common water leaks around your home, how to find them and what you can do about them.
Read More
Posted on by Gabriel Halimi
Sump Pumps – Usage, Installation, and Troubleshooting

In this article, we’ll explain how sump pumps work and give you some basic maintenance tips to keep your pump running for years to come. We’ll also go over some common issues you might have and show you how to replace an old pump.  

Read More
Posted on by Gabriel Halimi
Protect Yourself From Water Utility Overbilling

Many homeowners have had the unfortunate experience of receiving an unexpectedly high water bill, despite no actual increase in water usage. Here’s how to investigate the problem on your own. 

Read More
Posted on by Gabriel Halimi
5 Ways To Extend The Life of Your Water Heater
Read More
Posted on by Gabriel Halimi
Plunger Won’t Work? 5 Ways To Dissolve Waste From Pipe Walls
For every single one of these methods, bring a pair of gloves. Unclogging toilets is a messy business.
Read More
Posted on by Gabriel Halimi
How to Maintain Your Old Pipes

If you’re looking to avoid tearing up the walls and floors and re-plumbing the whole house, here are a few steps you can take to extend the lifespan of those decades-old pipes.

Read More
Posted on by Gabriel Halimi
10 Tips for Finding Small Water Leaks at Home

But small leaks are a big deal. Here are a couple of reasons you should be paying attention to small leaks.

Read More
Posted on by Gabriel Halimi
How to Get Insurance to Pay for Water Damage
In this guide, we’ll go over the types of water damage covered by most insurance, important things to consider in your policy, and an outline of the claims process.
Read More
Posted on by Gabriel Halimi
What To Do About Roots In Your Pipes (Without Killing the Tree)

In this article, we’ll explain how roots make their way into your pipes and give you the rundown on how to get rid of them without doing harm to the tree itself.

Read More
Posted on by Gabriel Halimi
10 Easy Ways to Unclog Your Drains

Here are 10 easy DIY methods to unclog a drain in your home.

Read More
Posted on by Gabriel Halimi
What to Do When a Pipe Bursts (and Before the Plumber Gets There)
If you’re experiencing a pipe burst, call a real plumber. In the meantime, here are a few steps you can take to reduce damage and prevent future leaks.
Read More
Posted on by Gabriel Halimi
Everything You Need to Know About Pressure Reducing Valves

In this guide, you’ll learn how pressure reducing valves work and why they’re such an important part of your plumbing system.

Read More
Posted on by Gabriel Halimi
10 Best Practices to Hurricane Proof Your Home
There’s plenty you can do to protect your property from natural disasters.
Read More
Posted on by Gabriel Halimi